UTV Stereo Platinum Series Agm 925 Battery
UTVS925 is a prime replacement "2nd battery" for your Polaris RZR. This battery is also a direct Pro Series RZR (Pro R - Pro XP - Turbo R) replacement battery as well as the replacement battery for the Can-Am Defender (All models) UTV Stereo 925 Platinum Series AGM battery has very low internal resistance, is capable to deliver high currents on demand and offers a long service life, even when deep cycled. AGM batteries must be kept on a battery charger / maintainer during storage in order to maintain optimal performance. Upgrade your battery with one of our platinum series batteries or battery kits. Compatibility:
- Replacement 2nd battery for Polaris RZR UTV Stereo 2nd Battery Kit
- UTVS925 Battery Specification Information
UTV Stereo Polaris RZR 2nd Battery Kit
UTV Stereo famous 2nd Battery Kit includes a UTV Stereo Platinum Series Performance AGM Deep Cycle Battery. The Isolated system lets you drain the 2nd battery while the key is off preserving your stock battery's charge for starting. Once the car is running, both batteries are connected and being charged. We make it easy and reliable! Now you can sit with your lights on and music playing all worry free.
- Kit Includes:
- UTV STEREO PLATINUM SERIES (UTVS925) AGM Deep Cycle Performance Battery
- Full Wire Kit with Sealed Connections
- Battery Isolator
- Battery Mount with Hardware
- Instructions
UTV Stereo Polaris Xpedition 2nd Battery Kit
The UTV Stereo Platinum Series Batteries are the longest lasting, most durable AGM (Absorbent Glass Mat) batteries on the market. This means your stereo will play longer and your lights will shine brighter. These batteries are spill proof, vibration & shock resistant, and can be installed in any orientation. Our batteries give you the ability to add aftermarket electronics to your UTV by providing you with more storage capacity and higher power output. To maintain its peak performance, it is imperative to keep this AGM battery connected to a reliable battery charger/maintainer during storage.
UTV Stereo RZR Ride Command Amplifier Harness + Remote
Add an amplifier to your Polaris Ride Command with our simple plug and play harness. Simply plug into AMP1, AMP2, or AMP3 then connect RCAs and Remote to your amplifier, its that easy! You can also make your entire install super easy with our Ride Command Amp Kit & Mounting Plate. Works on 2 and 4 seat Models Factory Ride Command Plugs:
- Factory Plug AMP1 is the front output, full range. Controlled by “front” on Ride Command
- Factory Plug AMP2 the rear output, full range. Controlled by “rear” on Ride Command. Tip! For Installs where you are installing a sub-woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub-woofer. Fading to the front speakers produces less sub output, and fading to rear produces more sub output by lowering fronts.
- Factory Plug AMP3 full range output. Not independently controlled by Ride Command, no on-screen adjustments. This is a good option for sub-woofer.
UTV Stereo RZR® Plug-In Front Camera (Ride Command Equipped Only)
You spend all that money on a sweet new RZR and realize they didn't include the front camera. Don't worry because the factory plug is there waiting, all you need is UTV Stereo's plug and play front camera for your Ride Command system. Simply pop of the grill, line up and snap in the camera and your set! It's really that easy. Compatible with factory installed ride command systems. NOT compatible with Pro Series models (Pro XP, Turbo R, Pro R) Must have factory Ride Command System. Only works as a front camera, will not work for rear camera.
| MODEL | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 |
|---|---|---|---|---|---|---|---|---|
| RZR S 1000 | ||||||||
| RZR S4 1000 | ||||||||
| RZR XP 1000 | ✔ | ✔ | ✔ | |||||
| RZR XP Turbo | ✔ | ✔ | ✔ | |||||
| RZR XP Turbo S | ✔ | ✔ | ✔ | |||||
| RZR XP Turbo Dynamix Edition | ✔ | ✔ | ✔ | |||||
| RZR XP 4 1000 | ✔ | ✔ | ✔ | |||||
| RZR XP 4 Turbo | ✔ | ✔ | ✔ | |||||
| RZR XP 4 Turbo S | ✔ | ✔ | ✔ | |||||
| RZR XP 4 Turbo Dynamix Edition | ✔ | ✔ | ✔ | |||||
| RZR XP 1000 Trails and Rocks | ✔ | ✔ | ✔ | |||||
| RZR XP 1000 High Lifter | ✔ | ✔ | ✔ | |||||
| RZR XP 4 1000 High Lifter | ✔ | ✔ | ✔ |
UTV Stereo RZR® Ride Command Amplifier Harness - No Remote Wire
This Ride Command Plug will let you get the RCA low level audio output needed to run an amplifier on the Polaris factory source unit. This adapter is designed for audio only and has no Remote Out built in. Factory Ride Command Plugs:
- Factory Plug AMP1 is the front output, full range. Controlled by “front” on Ride Command
- Factory Plug AMP2 the rear output, full range. Controlled by “rear” on Ride Command. *Tip! For Installs where you are installing a sub-woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub-woofer. Fading to the front speakers produces less sub output, and fading to rear produces more sub output by lowering fronts.
- Factory Plug AMP3 full range output. Not independently controlled by Ride Command, no on-screen adjustments. This is a good option for sub-woofer.
UTV Stereo RZR® Ride Command Amplifier Harness - Turn On & Delay Regulated
Do you have a "turn on pop" or "amp that won't stay on" or "amp that wont shut off"? Then you need this part because it regulates the voltage on the blue remote out wire to fix these common Ride Command Problems. The REGULATED Ride Command Harness is similar to the Standard Harness, only difference is the regulated remote output. Simply plug into AMP1, AMP2, or AMP3 then connect RCAs and Remote to your amplifier, its that easy! Works on 2 and 4 seat Models Factory Ride Command Plugs:
- Factory Plug AMP1 is the front output, full range. Controlled by “front” on Ride Command
- Factory Plug AMP2 the rear output, full range. Controlled by “rear” on Ride Command. *Tip! For Installs where you are installing a sub-woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub-woofer. Fading to the front speakers produces less sub output, and fading to rear produces more sub output by lowering fronts.
- Factory Plug AMP3 full range output. Not independently controlled by Ride Command, no on-screen adjustments. This is a good option for sub-woofer.
UTV Stereo USB & Auxiliary Flush Mount Adapter for Source Units
Here is a great way to get easy access to the Rockford PMX inputs that generally get hidden during install in a UTV. You can charge or play music easily with this dash mount adapter. Mounts either on dash or underneath with supplied bracket. UNIVERSAL USB/3.5mm AUXILIARY INTERFACE MOUNT