XTC Power Products 6 Switch Power Control System
XTC Power Products 6 Switch Power Control System for Polaris RZR XP 1000/Turbos XTC Power Products Leads the way in UTV Wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Polaris RZR. Unlike other switch systems available, the Power Control System’s designed with the installer in mind. Every PCS has a vehicle specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions. Power Delivered The PCS includes 1 x 30 amp and 3 x 20 amp high current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. There are also 2 x 10 amp direct wire circuits provided for low power accessories like rock lights or whip lights. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. Most UTV charging systems produce anywhere from 40-70 amps. Because of this, a 50 amp circuit breaker at the battery safely supplies power to the PCS. Installing a 100+ amp high power switch system is not practical in a UTV. The Power Control Systems Barrier Strip Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth. Switch Power Harness Configurations Designed for the Polaris RZR XP’s, the PCS-64 has become our most universal Power Control System for switch mounting locations. The switch harness has three rocker switches that mount in the center dash, followed by a single switch mounted right of the steering wheel, and then two more go left of the steering wheel. Also, rocker switches can be installed together in any custom way deemed fit by the installer as well. Moreover, a Molex connector links the switch harness to the main Power Control System. Modular Power Connection The PCS-64 has a modular power connector at the fuse box with +/- ring terminals that connect to ignition power. Consequently, the lower LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The upper light only comes on when the rocker switch’s pressed. It should be noted that the wiring system will work with or without the vehicle’s ignition power on. The PCS-64 comes with 6 incandescent lit Carling V-Series Rocker Switches that have an actuator with a red lens. Alternatively, the PCS-64-NS does not come with any switches. LED lit custom rocker switches are available separately and can be found on our Rocker Switch page.
XTC Power Products Front Turn Fang Light Set
XTC Power Products Front Turn Fang Light Set for Polaris RZR Turbo S 2018 - 2023 and Polaris RZR XP 1000/Turbo 2019 - 2023
XTC Power Products Light Duty Single Switch for Polaris Vehicles with Pulse Power System
XTC® Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our Light Duty Power Control System for the Polaris Pulse Bar. It can be installed in minutes and is pre-wired for optional dual lit switch. It comes with 5′ of wire to go to your accessory. Can run items like Dome Light, Rock Lights, Rear Lights, Intercom or stereo activation, 10 Amps or less.
XTC Power Products Plug and Play Horn Kit with Blue LED Rocker Switch
XTC Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our Easy To Use Horn Systems. Our Horn Systems come with a FIAMM Automotive Horn. They come with a Round Push Button or an optional Carling Laser engraved Rocker Switch or a Carling LED lit switch. Our Horn Systems come with everything needed for install, no hunting around for those extra parts. XTC Power Products are Made In the U.S.A. XTC® Gets You Wired For Fun.
XTC Power Products Plug and Play Horn Kit, Laser Engraved Rocker Switch
XTC Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our Easy To Use Horn Systems. Our Horn Systems come with a FIAMM Automotive Horn. They come with a Round Push Button or an optional Carling Laser engraved Rocker Switch or a Carling LED lit switch. Our Horn Systems come with everything needed for install, no hunting around for those extra parts. XTC Power Products are Made In the U.S.A. XTC® Gets You Wired For Fun.
XTC Power Products Plug and Play Power Adapter with 6″ 6 LED License Frame
XTC® Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our Easy To Use Adapters. No need to cut the factory wiring to add things like tail lights and whip lights, just unplug the OE harness and plug the adapter between the connectors and run the wire, it is that easy. Our Adapters come with everything needed for install, no hunting around for those extra parts. XTC Power Products are Made In the U.S.A. XTC Gets You Wired For Fun®!
XTC Power Products Polaris Instrument Cluster Turn Signal Adapter – Lets TSS use the OEM Turn Arrows
XTC® Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our TSS-Turn Signal System(Patent Pending). The System comes with a Marine Switch that activates the Turn Signal System and also Indicates with a flashing arrow. It is Easy to install with no wires to cut and no crimping. The system comes with pre made wire harnesses that interface with the OEM harness, just unplug the car’s rear light harness connector and plug our harness in, it is that easy. The brake lights work as turn signals just like a car including Hazard Lights. Since these vehicles are used primarily for off road use, the lit dash switch is more practical over those cumbersome turn levers that break off. It includes a lit Hazard Switch and rear power out for the license plate light or whip light. Our products help you get Wired For Fun.
XTC Power Products Polaris Instrument Cluster Turn Signal Adapter – Lets TSS use the OEM Turn Arrows
XTC Power Products Leads the way in UTV Wiring Solutions. From our Plug and Play Product line comes our TSS-Turn Signal System(Patent Pending). The System comes with a Marine Switch that activates the Turn Signal System and also Indicates with a flashing arrow. It is Easy to install with no wires to cut and no crimping. The system comes with pre made wire harnesses that interface with the OEM harness, just unplug the car’s rear light harness connector and plug our harness in, it is that easy. The brake lights work as turn signals just like a car including Hazard Lights. Since these vehicles are used primarily for off road use, the lit dash switch is more practical over those cumbersome turn levers that break off. It includes a lit Hazard Switch and rear power out for the license plate light or whip light. Our products help you get Wired For Fun.
XTC Power Products Self-Canceling Turn Signal System with Horn
XTC Power Products Self-Canceling Turn Signal Kit for Polaris RZR Turbo S and 19+ XP 1000/Turbo Models XTC Power Products Leads the way in UTV wiring. You will never leave your turn signal on with our new Self-Canceling Turn Signal System for the Polaris RZR Turbos S and 2019+ XP 1000/Turbo models with a third brake light . Similar to its predecessor, the TSS (Turn Signal System), the ATS is a Plug and Play easy install Honda Pioneer turn signal kit. The ATS consists of a small solid-state control box that performs its functions–differing from the prior generation’s larger control box. Like the TSS, the ATS Self-Canceling Turn Signal Kit is a modular design with vehicle specific SKUs. How the ATS Works All ATS part numbers include a marine grade rocker switch with laser-cut directional arrows that flash green when activated. When you press the turn signal rocker switch, the ATS will activate the turn blinker for a short duration and then self-cancel. This feature is useful for simple lane changes. On the other hand, an extended rocker switch press will yield a longer blinker duration suitable for making left- and right-hand turns. You can manually cancel the turn signal by pushing the actuator a second time. Also Included Also included in our Self-Canceling Polaris RZR Turbo S turn signal kit is a ‘Hazard/Horn’ rocker switch. Pressing the top ‘Hazard’ side of the actuator will turn on the hazard lights, pressing it again deactivates them. Furthermore, pressing the lower portion of the custom rocker switch will activate the included street legal FIAMM horn. Each ATS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the ATS. As a result, the opposing brake light still functions normally while the activated turn signal brake light flashes. Hands-on with the ATS Polaris RZR Turbo S Turn Signal Kit Unlike our competitors, all ATS kits include an auxiliary power out for a license plate light or whip lights. Moreover the aux power is good for powering our 6″ LED Lit License Plate Frame. Above all, each system comes with a vehicle specific power connection. Without a doubt, it’s easy to install with no wires to cut and no crimping. Because of its size, the ATS is versatile to mount as well. Everything needed to integrate with your vehicles OEM brake light harness included. Unplug the rear light harness, plug-in ours, and enjoy. XTC Power Products, made in America and Wired For Fun.