AJK OffRoad Polaris Xpedition Front Bumper
Our Polaris Xpedition Front bumper is a must for anyone wanting some protection on your front end. Our bumper is designed to take some abuse. This bumper will work with all Polaris Xpeditions. Our bumper bolts on to the existing frame and front bumper bar and no drilling is required. Options: -Lighting We offer flush mount 3″ cube lights to fit directly in our bumper. All necessary wiring is provided to plug directly into the pulse bar in the front of the machine. These lights are very bright!!!!!! If you do not want the lighting we offer a hexagon cover to fill the void where the light goes, so in the future you can purchase the lights. The hexagon cover will be the same color as your hexagon accents. -Hexagon Accents Our Hexagon Accents are a great addition to the bumper and it also gives the bumper some nice color. All our colors are matched to the Polaris Xpediton colors.
AJK OffRoad Polaris Xpedition Grille
Our Grill for the Polaris Xpedition will make your machine stand out from the rest. Our grill fits in the same location as the stock grill and comes standard with our 3 layer hexagon pattern. This grill comes assembled and ready to be installed. We used three separate pieces, each powder coated factory Polaris colors. Each layer is CNC laser cut from .063” thick aluminum and bent to match the factory body style. The outside and rear ring are colored to accent the middle black ring. This combination gives the front end of your machine the attention it deserves. Install: We will provide install directions when the grill is shipped. You will need to cut the existing mesh off your current grill and will need to reuse the factory locking tabs that hold your grill in place. This is roughly a 30 minute install.
AJK OffRoad Polaris Xpedition Headache Rack 1/2 Rack
We have designed out Polaris Xpedition Headache Rack to utilize the most storage from your Xpedition. Our Headache rack mounts on your bed rails and is slightly lower than your roof. With our Headache rack you are able to store more items for your long weekend getaways. We have incorporated some moly panel holes along with holes for your rotopax mount. This is a very rigid 3 piece design CNC Laser cut from .125 thick aluminum and then powder coated a mild textured black. The top tray measures roughly 11.5″ by 51″ long.
AJK OffRoad Polaris Xpedition Headache Rack 3/4 Rack
We have designed out Polaris Xpedition Headache Rack to utilize the most storage from your Xpedition. Our Headache rack mounts on your bed rails and is slightly lower than your roof. With our Headache rack you are able to store more items for your long weekend getaways. We have incorporated some moly panel holes along with holes for your rotopax mount. This is a very rigid 3 piece design CNC Laser cut from .125 thick aluminum and then powder coated a mild textured black. The top tray measures roughly 22.5″ by 51″ long. With this large headache rack you are able to fit two of our packout mounts in the top tray. Please select above how many packout mounts you would like.
AJK OffRoad Polaris Xpedition Inner Fender Guards
Our Polaris Xpedition Inner Fender Guards help protect the unwanted from going through your wheel wells. These are designed to help protect your front inner fenders from branches puncturing your inner fenders. We have designed these from 1/8″ thick aluminum and CNC bend them for the perfect fit on your machine. Our Inner Fender Guards will not affect tire size and work great with our Rock Sliders. These fit tight to the plastic inner fenders. Our Inner Fender Guards only weigh 7 lbs but are incredibly strong with our design. These are extra big and cover the most amount of inner fender possible. These are very easy to install by simply removing the factory bolts in the fenders and bolting our fender guards on. Sold as a set for driver and passenger side.
AJK OffRoad Polaris Xpedition Packout Mount
Our Milwaukee Packout Mount is the perfect storage solution for your Polaris Xpedition. This mount uses existing mounting holes along with two self drilling screws. This is a very simple install. Simply remove three bed bolts and replace them with the supplied bolts, then use the two supplied self drilling screws and fasten the front of the mount to the bed. We CNC Laser cut our Milwaukee Packout Mount in house from 10 gauge P.O. steel then powder coat it black. This mount works with: Polaris Xpedition model along with any other model that has the same bed configuration. Milwaukee has many different options of tool boxes, each Milwaukee box is stackable and offers different size options. They even offer a large cooler.
AJK OffRoad Polaris Xpedition Rear Bumper
Our Polaris Xpedition rear bumper is a must for anyone wanting some protection on your rear end. Our bumper is designed to take some abuse. This bumper will work with the ADV models along with the XP models with the dump bed. Our bumper bolts on to the existing bed and no drilling is required. Our Rear Bumper comes standard with heavy duty D-ring mounts that are welding to our mounting supports and not just the face of the bumper. The rear camera view will be limited to about 1/2 of the screen with this bumper. Our D-ring shackle mounts are designed to fit up to a 7/8″ shackle or a soft shackle. D-Rings are not included. Options: -Lighting - We offer flush mount 3″ cube lights to fit directly in our bumper. Wiring harness is provided. These lights are very bright! If you do not want the lighting we offer a hexagon cover to fill the void where the light goes, so in the future you can purchase the lights. -Tread Plate - Our tread plate is designed to help you from slipping on the bumper when you step on it and it also give the bumper some nice color. All our colors are matched to the Polaris Xpediton colors.
AJK OffRoad Polaris Xpedition Rear Packout Mount
Our Milwaukee Packout Mount is the perfect storage solution for your Polaris Xpedition. This is our rear mount and mounts towards the back of your bed close to the tailgate. This mount uses existing mounting holes along with two self drilling screws. This is a very simple install. Simply remove three bed bolts and replace them with the supplied bolts, then use the two supplied self drilling screws and fasten the rear of the mount to the bed. We CNC Laser cut our Milwaukee Packout Mount in house from 10 gauge P.O. steel then powder coat it black. This mount works with: Polaris Xpedition model along with any other model that has the same bed configuration. Milwaukee has many different options of tool boxes, each Milwaukee box is stackable and offers different size options. They even offer a large cooler.
AJK OffRoad Polaris Xpedition Rock Sliders
We have designed our Polaris Xpedition Rock Sliders to handle the abuse that you give them. These are a slim looking rock slider that helps protect your plastic and aids in sliding across the rocks that would other wise damage your plastic. We have designed these from 10 gauge plate steel. These are CNC laser cut and bent to fit the contour of your plastic. After we bend these we powder coat them our black powder coat. Along with the set of rock sliders we supply the studs that need to be bolted in your factory frame. You will need to cut the holes in the plastic for the studs to stick through the plastic. After the studs are installed simply bolt our rock sliders to the studs and reinstall the bottom bolts holding your skid plate on. All hardware is included.
AJK OffRoad Polaris Xpedition Roof Rack
We have designed out Polaris Xpedition Roof Rack to handle anything you throw on top of it. It is made from .125 thick aluminum and is powdered coated a mild texture black. This roof rack offers two different height positions for the rails. The rails can either sit flush with the top or can be set down in the frame a little over 2″ to keep everything on top of the rack. With our Polaris Xpedition Roof Rack there is many tie down points to keep all our items secure. This rack works great for carrying all our camping gear for that long weekend getaway. Our roof rack uses existing mounting holes and bolts in your roof so no drilling is required. All hardware is supplied. This rack is roughly 5″ tall. We offer this rack for all models of the Polaris Xpedition. Please select your option above for the correct model that you have. All our roof racks are the full length of the roof. On the ADV models it covers the full length of the roof also.
AJK OffRoad Polaris Xpedition Short Headache Rack 3/4 Rack
We have designed out Polaris Xpedition Headache Rack to utilize the most storage from your Xpedition. Our Headache rack mounts on your bed rails and is 24″ high above your bed. With our Headache rack you are able to store more items for your long weekend getaways. We have incorporated some moly panel holes along with holes for your rotopax mount. This is a very rigid 3 piece design CNC Laser cut from .125 thick aluminum and then powder coated a mild textured black. The top tray measures roughly 22.5″ by 54″ long. With this large headache rack you are able to fit two of our packout mounts in the top tray. Please select above how many packout mounts you would like.
AJK OffRoad Polaris Xpedition Spare Tire Carrier
We have designed our Polaris Xpedition Spare Tire Carrier to bolt on the bed rail of the Polaris Xpedition. Our tire carrier sits length ways in the bed to allow you to see out your rear window. Our tire carrier is designed to be fully adjustable for different size tires and offsets. In the pictures above you can see that we have a 32″ tall tire and also a 30″ tall tire in the pictures. With a 32″ tall tire the tire sits above the bed floor 8″, with a 30″ tall tire there is 6.5″ of clearance between the bed and bottom of the tire.