Rugged Radios Dual Headset / Helmet STX STEREO Jack Flush Mount
Customize your install and make cable management easier than ever! Use a Rugged Radios Dual Jack Mount to provide a convenient and accessible connection point on your dash, center console, or anyplace you prefer. No more fumbling for hard to reach cables! Spend less time getting ready and just plug in and go! Offered in a Single, Dual, and Bar Mount version, the options are endless. Simply run the connections off the back of your intercom, behind the dash and secure into this jack mount. Cables not included.
Rugged Radios Dura-Link Cable Plug for All 4C Offroad Jacks
Offroad Plug for Nexus style jacks. Whenever you disconnect your helmet kit, use this plug to keep the female Nexus jack sealed against water, dirt, and debris. Perfect for when you're out of the vehicle or washing out the weekend dust and dirt. Protect your investment and keep your comms in top working order! Sold individually.
Rugged Radios Female Offroad Straight Cable to Male STX Stereo or TRAX Intercom Adapter
Connect your mono Rugged Radios headset or helmet kit to STX Stereo or PCI TRAX system!
Rugged Radios Hand Speaker Mic Waterproof for Handheld Radios
This updated waterproof Rugged Speaker Hand Mic is built tough. The unit features a conventional side-mounted Push-to-Talk button for ease of operation. Also features a loud front-firing speaker and an earphone jack for additional headset or ear piece accessory options. Built to last in extreme environments such as Police, Fire/Safety, Emergency Services, Security, Racing, Industrial, Security, Heavy Equipment Operators, and other places where you need to be heard. Fits Kenwood Handheld Radios: TK208, TK2100 PRO TALK, TK2101 PRO POWER, TK2130 PRO TALK XLS, TK220, TK240, TK240D, TH248, TK250, TK260, TK260G, TK270, TK270G, TK308, TK3100 PRO TALK, TK3101 FREE TALK XL, TK3102 PRO POWER, TK3130 PRO TALK XLS, TK3131 FREE TALK XLS, TK320, TK340, TK340D, TK348, TK350, TK353, TK360, TK360G, TK370, TK370G, TK372G, TK373, TK430, TK431, TK2160, TK2170, TK2200, TK2202, TK3160, TK3170, TK3173, TK3200, TK3201, TK3202, Fits HYT Handheld Radios: TC620, TC700EX Fits Relm Handheld Radios: RPV516A, RPV599A, PLUS, RPU416A, RPU499A PLUS Fits Rugged Handheld Radios: V3, R1, GMR2, RDH-X, RH-5R, RDH16, ABH
Rugged Radios Headset / Helmet Adapter Cable to Rugged and Kenwood Handheld Radios
Connect your V3, R1, RH-5R, RDH16 or Kenwood 2-Pin radio to an OFFROAD helmet kit or headset with this straight cord. Plug the 2-pin connector into your radio and the OFFROAD connector (blue plug) into your OFFROAD helmet kit or headset and now you're listening to radio traffic.
Rugged Radios Hole Mount Push to Talk Cable (PTT) with 48" Straight Cord for Intercoms
Tough reliable hole mount push to talk. Features high bend test cable and industry standard 3 pin connector that plugs directly into Rugged intercoms. Plugs directly into Rugged, Avcomm, PCI and other offroad intercoms eliminating the costly adapter cables. Cable Length: 4ft Installation: 5/8 inch hole mounting Compatible with:
- RRP5100
- RRP5050
- RRP660
- RRP660 PLUS
- RRP696
- RRP696 PLUS
- RRP6100
Rugged Radios Hole Mount Steering Wheel Push to Talk (PTT) with Coil Cord for Car Harnesses
Tough reliable hole mount push to talk. Cable Length: 2.5ft coiled 7ft extended Installation: 5/8 inch hole mounting Applications: Car harness: NASCAR CH-N-2, IMSA CH-I-2, OFFROAD CH-O-2 and Intercoms Rugged RRP502 and RRP510. Optional steering wheel adaptor use PTT-HM-MT-6B
Rugged Radios Hole Mount Steering Wheel Push to Talk Cable (PTT) with Coil Cord for Intercoms
Tough reliable hole mount push to talk. Features high bend test coil cord and industry standard 3 pin connector that plugs directly into the back of your intercom. Installation: 5/8 inch hole mounting Optional Accessory: The perfect match with this PTT is the Push-to-Talk Hole Mount Plate for 6 Bolt Steering Wheel. Sold separately, this provides a permanent mounting location behind the steering wheel. Compatible with:
- RRP5100
- RRP5050
- RRP660
- RRP660 PLUS
- RRP696
- RRP696 PLUS
- RRP6100
Rugged Radios Long Range Antenna for R1 / RDH-X / ABH7 Handheld Radio
Take your handheld radio to the next level with the all new Rugged long-range handheld radio antenna. Featuring a precisely-tuned loading coil, fitted to a machined aluminum base with a high impact housing, and HyperFlex stainless steel wire rope whip, the Rugged long-range handheld antenna will increase your transmit and receive range by up to 30%. When every single call counts, this antenna delivers This long range antenna fits Rugged Radios R1, RDH-X, and ABH7 handheld radios. No additional BNC connector required! This No Ground Plane antenna is the long range leader for handheld radios. Simply screws onto the existing antenna mount via the SMA connector. With this antenna you increase your transmit distance, maximizing the range and performance of your handheld radio. For outdoors, off-road racing, longer distances — the Dual Band Ducky is the best choice!
Rugged Radios Lower Accessory Panel for Polaris Polaris RZR PRO XP, RZR Turbo R, and RZR PRO R Dash Mount Radio and Intercom
The Lower Accessory Panel for Polaris Pro XP, RZR Turbo R, and RZR PRO R Multi Mount allows you to customize your install with a number of accessory options. Lower Accessory Panels: Rocker Switch: Add 6 Rocker Switches along with a slot to relocate the factory 12-Volt plug. Switch Pros 8: Add a location for a Switch Pros 8 button controller along with a slot to relocate the factory 12-Volt plug and add 2 Hole Mount PTTs. Switch Pros 12: Add a location for a Switch Pros 12 button controller. SPOD Touchscreen: Add a location for an 8 circuit Touchscreen SPOD along with a slot to relocate the factory 12-Volt plug and add 2 Hole Mount PTTs. SPOD Switch Panel: Add a location for an 8 circuit Switch Panel SPOD along with a slot to relocate the factory 12-Volt plug and add 2 Hole Mount PTTs. Jack Mount: Add 2 Flush Jack Mounts, 2 Hole Mount PTTs and a slot to relocate the factory 12-Volt plug. Scosche M8RIX: Add a location for a Scosche M8RIX controller. Note: Switches, PTTs,and all other Accessories sold separately. Compatibility: The Lower Accessory Panels only work with the Multi-Mount System for Polaris Pro XP, RZR Turbo R, and RZR PRO R.
Rugged Radios M1 Race Series Waterproof Mobile Radio - Digital and Analog
Powerful amplifiers, streamlined circuits, and efficient receivers, make the Rugged M1 mobile 2-way radios easy to use and go the distance. Designed from the ground up in Arroyo Grande California, the M1 is IP67 waterproof, and has a all-aluminum chassis protects vital circuits from Radio Frequency Interference (RFI) improving performance and reducing noise. The large, clear, easy-to-read display provides quick access to programmable controls, and an intuitive user interface. The included Accessory Hub provides convenient remote access to the programming cable connection and a 3.5 mm external speaker output. Ready to expand with the Rugged Ready port allows you to connect an almost unlimited amount of Rugged accessories. From intercoms, to headsets and much more Rugged accessories have you covered. From the deserts of Nevada to the Baja Peninsula the Rugged M1 is the tough competitor that wants to win. Easy upgrade: fits all existing RM60 mounts. Dimensions: 185 mm x 141 mm x 40 mm Compatibility: This radio works with all VHF business band radios operating on the same frequencies. Radio models include, but are not limited to: RDM-DB, M1, RDH-X, R1, V3, RM60, RH5R, RDH16-V, as well as Icom, Motorola, Kenwood business band radios, and more.
Rugged Radios MAC Air 2-Person Helmet Air Pumper (Bundle)
Stay cool and eliminate dust with the MAC Air helmet pumper! Whether you’re desert racing in Baja, cruising the sand dunes at Glamis, or hitting the short course track our MAC Air helmet pumper is a must-have for comfort and dust control. Constructed using injection-molded ABS polymer, the housing is optimized for increased airflow. Combined with a special built high static pressure fan, the MAC Air produces more pressure and more volume than any other helmet pumper available! The MAC Air takes helmet air pressure to a new level. The MAC Air utilizes a dual filtering system that increases performance and prevents premature clogging. Its external pre-filter features uniform micro openings that filter out most dust and debris before it can reach the internal filter. After race day, simply clean both washable filters with water, and you’re ready for the next event! Easily mount using our exclusive half clamp bar mounts available in most tubing sizes. VSC (Variable Speed Controller) Take control of your air with our Rocker Switch Variable Speed Controller (VSC) for the MAC Helmet Air Pumpers! This convenient rocker switch panel controller gives you quick, easy access to adjust the volume of air flow in your pumper without taking up valuable dash space.