DRT Motorsports HD Billet Aluminum Tie Rod Kit (M14 Rack)
The DRT Motorsports HD Tie Rod Kit for the Polaris XP Platform (64") 2015-2018 (M14 Steering Rack) is designed to strengthen and add reliability to this potent powerplant. Made of Aerospace grade 6061-T6 billet bar stock, this DRT tie rod kit is much stronger than oem, lighter in weight without sacrificing strength, and will clear all components through the entire range of motion. Even at full droop or compression, this tie rod set will clear all suspension and steering components at any point in the steering range so you can ride with confidence. The 20010TR01201 – The DRT Motorsports HD Tie Rod Kit for the Polaris XP Platform (64") 2015-2018 (M14 Steering Rack) works in conjunction with the OEM M14 steering rack and replaces the OEM Rod Ends. We use 3 piece PTFE lined 5/8” chromoly rods ends and our proprietary inner ball joint to provide sealing of the OEM bellow and protect the steering rack from intrusion of water, dirt, and sand. DRT spec stainless steel misalignment spacers and class 10.9 hardware is used to provide the required clamping force to keep you on the trail. The DRT Tie Rods are finished in Military Grade anodized black and marked with the DRT Motorsports; proudly made in the USA.
DRT Motorsports HD Billet Aluminum Tie Rod Kit (M16 Rack)
The DRT Motorsports HD Tie Rod Kit for the Polaris XP Platform (64") 2019+ XP1000/4, '17+ XP Turbo/4 (M16 Steering Rack) is designed to strengthen and add reliability to the this potent powerplant. Made of Aerospace grade 6061-T6 billet bar stock, this DRT tie rod kit is much stronger than oem, lighter in weight without sacrificing strength, and will clear all components through the entire range of motion. Even at full droop or compression, this tie rod set will clear all suspension and steering components at any point in the steering range so you can ride with confidence. The 20010TR02201 – The DRT Motorsports HD Tie Rod Kit for the Polaris XP Platform (64") 2019+ XP1000/4, '17+ XP Turbo/4 (M16 Steering Rack) works in conjunction with the OEM M16 steering rack and replaces the OEM Rod Ends. We use 3 piece PTFE lined 5/8” chromoly rods ends and our proprietary inner ball joint to provide sealing of the OEM bellow and protect the steering rack from intrusion of water, dirt, and sand. DRT spec stainless steel misalignment spacers and class 10.9 hardware is used to provide the required clamping force to keep you on the trail. The DRT Tie Rods are finished in Military Grade anodized black and marked with the DRT Motorsports; proudly made in the USA.
DRT Motorsports Hood Scoop - Black
The DRT Motorsports 2020+ Polaris RZR XP Pro High Impact ABS Hood Scoop V2.0 is essential for Pro R, Turbo R, and Pro XP riders that want their UTV to stand out with aggressive styling and a custom look. The DRT Pro V2.0 hood scoop is constructed from injection molded high-impact ABS with a bright anodized mesh insert that is paint or wrap-ready. This scoop is a direct replacement for your factory plastic hood cover and only takes a few minutes to install. The DRT Pro Series ABS hood scoop V2.0 is a must-have for Pro riders.
DRT Motorsports Intake Vent Set
The DRT Motorsports Polaris (2024+) RZR XP 1000/4 Aluminum Air Intake Vent Cover Set (Black/Raw) is a great way to upgrade the look of your RZR XP 1000 / 4 airboxes while adding protection to the mesh air filters. This multilayer laser cut intake vent cover set includes a top plate finished in black powder coat and a contrasting bright anodized mesh back plate. The kit includes DRT Motorsports Aluminum badges to complete the look. The intake vent covers are made of corrosion-resistant 6061-T6 aluminum, and can easily be powder-coated or painted to customize the look of your ride.
DRT Motorsports Oversize Tire Carrier Mount Accessory for 20005TC03101
DRT Motorsports Oversize Tire Carrier Mount Accessory for 20005TC03101 DRT Motorsports Oversize Tire Carrier Mount Accessory for DRT Motorsports Tire Carrier / Adventure Rack (Part #20005TC03101) is an essential upgrade for every RZR Pro XP, Turbo R, Pro R owner who needs the ability to carry an oversized +35” diameter tire. The oversized mount lifts and pushes back the mounting position of the spare tire to clear factory cage mount points. Made of lightweight aluminum to keep weight down and finished in powder coat for protection from the elements. Easy bolt on assembly with black oxide finished stainless steel hardware. The 20005TC11101 - DRT Motorsports Oversize Tire Carrier Mount includes upgraded gas shock for the added weight of the larger tire.
DRT Motorsports Packout Mount for Tire Carrier / Adventure Rack
The DRT Motorsports Packout Mount for the Polaris RZR Pro XP/Pro R/Turbo R Tire Carrier/Adventure Rack 20005TC03101 is the perfect accessory to securely carry your Milwaukee Packout cargo system. A full Milwaukee Packout pattern is laser cut into the Heavy Duty 10 gauge steel and finished in durable powder coat. The mount firmly attaches to the 20005TC03101 Tire Carrier/Adventure Rack with stainless steel coated hardware for strength, corrosion resistance, and durability to ensure years of use in the elements.
DRT Motorsports Polaris 2024+ RZR XP 1000/4 Billet Aluminum High Clearance Radius Rod Set
The DRT Motorsports Polaris RZR XP 2024+ 64” Billet Aluminum High Clearance Radius Rod Set is an essential for riders that need more strength, durability, adjustability and the highest clearance possible out of their rear suspension. The DRT Motorsports Polaris (2024+) RZR XP 1000/4 (64") High Clearance Radius Rod Kit is designed with performance in mind with reduced weight, significantly increased strength, and total adjustability when compared to your factory non-adjustable radius rod set. These rods are manufactured in the USA on state-of-the-art CNC equipment of aerospace grade aluminum. The upper rods are fully adjustable with left / right hand rod ends at each end for quick camber/adjustability. Lower billet high clearance rods feature press fit Teflon lined wide spherical bearings for maximum load resistance, and use spiral locks to ensure the remain in place. Complete replacement set of premium high clearance radius rods featuring improved strength, reduced weight, and increased durability over stock.
DRT Motorsports Polaris 2024+ Xpedition ADV5 / XP5 Rocksliders
The DRT Motorsports Polaris XPEDITION ADV5 / XP5 Rock Sliders provide unmatched protection to the body of your SXS in form-fitted and aggressive design. The DRT Motorsports Polaris XPEDITION ADV5 / XP5 Rock Sliders contour to the vehicle body for a clean and refined look. Made of 1/8î plate steel that is precision laser cut, formed, tabbed, gusseted, and welded to provide the most rigid construction possible to get you through the harshest environments. All steel components are finished in the DRT Signature Sand Black Powder Coat and feature contrast aluminum logo backing plates to show your choosing the best. We provide all of the necessary hardware to install, including wedge anchors that lock into the frame connection points. All alloy steel hardware is finished in a black zinc to avoid rusting or corrosion and plate connection hardware is stainless steel and finished in black oxide. The DRT Motorsports Polaris XPEDITION ADV5 / XP5 Rock Sliders are an easy installation and require minor cutting in the OEM pre-marked holes on the lower rocker panels.
DRT Motorsports Polaris 2024+ Xpedition Billet Passenger Grab Handle
DRT Motorsports Polaris XPEDITION Billet Passenger Grab Handle adds ergonomics and style to match the true potential and capabilities of the Polaris Xpedition platform. The billet grab handle is made on state-of-the-art CNC equipment of aerospace grade billet block of aluminum. The layered construction sandwiches a clear anodized contrast plate between the DRT logo plate to add aggressive style to your interior. Military grade anodize finish is applied to the base handle, contrast plate, and top plate. The use of black coated stainless-steel hardware keeps the assembly tied together. Each component is easily customizable to match your vehicle build colors. The DRT Motorsports Polaris XPEDITION Billet Passenger Grab Handle replaces OEM P/N 5457378-070. Matches 20205DR01201 DRT Motorsports Polaris XPEDITION NORTHSTAR Billet Interior Door Handle Kit (2pc) - (sold separately)
DRT Motorsports Polaris 2024+ Xpedition Front Grill Insert
The DRT Motorsports Polaris XPEDITION Front Grill Insert is essential to complete your UTV build. The DRT Polaris XPEDITION Front Grill Insert is laser cut from aluminum to precisely fit your trimmed OEM grill frame (OEM P/N 5457228-040). The DRT 20205FG01101 better protects the radiator and A/C condenser from small rocks and mud while allowing increased air flow to the cooling components of your XPEDITION. DRT Motorsports Polaris XPEDITION Front Grill Insert is a must for riders who want better protection, maximum cooling, and aggressive styling for their Polaris XPEDITION. Applications: 2024+ Polaris Xpedition, 2 and 4-door models
DRT Motorsports Polaris 2024+ Xpedition NORTHSTAR Billet Interior Door Handle Kit (2pc)
The DRT Motorsports Polaris XPEDITION NORTHSTAR Billet Interior Door Handle Kit (2pc) adds ergonomics and style to match the true potential and capabilities of the Polaris Xpedition platform. The billet door handle is made on state-of-the-art CNC equipment of aerospace-grade billet block of aluminum. The layered construction sandwiches a clear anodized contrast plate between the DRT logo plate to add aggressive style to your interior. Military-grade anodize finish is applied to the base handle, contrast and top plate. The use of black-coated stainless-steel hardware keeps the assembly tied together. Each component is easily customizable to match your vehicle build colors. Each handle replaces OEM P/N 5465274-070. Matches 20205GH01201 DRT Motorsports Polaris XPEDITION Billet Passenger Grab Handle (sold separately)
DRT Motorsports Polaris 2024+ Xpedition Rear Fender Mesh Set
The DRT Motorsports Polaris XPEDITION Rear Fender Mesh Set (Black/Raw) is a great way to upgrade the look of your SXS and add aggressive styling to the outer rear fenders. The DRT Xpedition Rear Fender Mesh Set complements the OEM body line of the outer rear fender, and attaches to OEM P/N 2639949-070(RH) & 2639949-070 (LH). This set includes a branded mesh top plate finished in black powder coat and a bright anodized solid panel contrast plate to offset the mesh and DRT laser branding. The rear fender mesh sets are made of corrosion-resistant 6061-T6 aluminum, and can easily be powder-coated or painted to customize the look of your ride.