UTV Stereo RZR® Ride Command Amplifier Harness – No Remote Wire

This Ride Command Plug will let you get the RCA low level audio output needed to run an amplifier on the Polaris factory source unit. This adapter is designed for audio only and has no Remote Out built in.

Factory Ride Command Plugs:

• Factory Plug AMP1 is the front output, full range. Controlled by “front” on Ride Command
• Factory Plug AMP2 the rear output, full range. Controlled by “rear” on Ride Command. *Tip! For Installs where you are installing a sub-woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub-woofer. Fading to the front speakers produces less sub output, and fading to rear produces more sub output by lowering fronts.
• Factory Plug AMP3 full range output. Not independently controlled by Ride Command, no on-screen adjustments. This is a good option for sub-woofer.